Aplab 80KVA to 150KVA UPS

ABOUT US


	Enterprise UPS Systems

	Online UPS (Extra Hi-Range)

	On Line UPS (Hi-Range)

	On Line UPS (Mid-Range)

	On Line UPS (Low-Range)

	Static Transfer Switch (STS)

	Line Interactive UPS

	Frequency Converter

	Inverter & Ultra Isolation Transformer

	Accessorial Products

Tel. : +91-22-67395555, 25821861
Fax : +91-22-25823137
Email : response@aplab.com

UPS Systems 80KVA to 150KVA - MP Series
3 Phase in / 3 Phase out

Features
	80 - 150KVA in 4 Ratings.
	Sophisticated High Specification On Line Configuration with Optional Static Switch.
	State of the Art IGBT Based Pulse Width Modulation (PWM) Technology to Reduce Harmonic Distortion and Increase Both Crest Factor Tolerance and Dynamic Stability.
	Higher Efficiency of Operation Means Aplab UPS has Significantly Lower Running Costs than Leading Competitors.
	Continuously Delivers Full Rated Power at Ambient as high as 45ºC.
	Parallel Operation of UPS.
	Comprehensive Indication of Normal and Fault Conditions.
	Excellent Unbalanced Line & Load Performance.
	Compatible with Sealed Maintenance Free Battery as well as Tubular Lead Acid Batteries.
	Compact Cabinet & Ultra Light Weight.
	Easy Installation with Wheels for Manoeuvreability and Front Terminal Box.
	Optional Remote Status Panel.

Technical Specifications
MODEL	HP3080	HP3100	HP3120	HP3150
RATED POWER (at PF 0.8)	80KVA	100KVA	120KVA	150KVA
INPUT
Voltage Nominal Range	400V AC 340V AC to 460V AC.
Frequency Nominal Range	50Hz. 47 to 53Hz.
Phase	Three Phase, 4 Wire.
AC to AC Efficiency	>88% peak		>89% peak
OUTPUT
Power Max.	80KVA/64KW	100KVA/80KW	1200KVA/96KW	150KVA/120KW
Current	116 Amps.	145 Amps.	174 Amps.	217 Amps.
Voltage	400V AC
Voltage Regulation	±1% Typical
Frequency	50Hz.
Frequency Stability	±0.05%.
Phase	Single Phase.
Waveform	Sinewave.
Total Harmonic Distortion	Less than 2% with Linear Load.
TRANSIENT RESPONSE (100% Load Step)	Less than ±5%.
RESPONSE TIME	Less than 60 milli-seconds to reach within ±2%.
LOAD POWER FACTOR RANGE	Unity to 0.8 Lag within specified max. output power ratings.
OVERLOAD RATING	a) 1/2 Hour b) 10 Seconds c) 10 Cycles	120% 150% 200%
PROTECTIONS	a) Input Over/Under Voltage b) Phase Fail c) Overload at the Output d) SOAR Protection for IGBTs e) Output AC Over/Under voltage g) High Speed Fuses for Semi-Conductor Devices h) Snubber Circuits for Power Semi-Conductor Devices
INDICATIONS	a) Mains On b) Inverter On c) Battery on Charge d) Mains Over/Under Voltage e) Phase Fail f) Low Battery Imminent g) Battery Over/Under Voltage h) Inverter Over/Under Voltage i) Inverter Overload j) Overheat
AUDIBLE ALARM	For Conditions from (d) to (j) a Local Buzzer operates.
REMOTE INDICATIONS	A potential free contact is provided for fault indications and alarm.
COMPUTER INTERFACE	RS-232 (Optional).
METERING	16 x 2 LCD to measure the following : a) AC Input/Output Voltage per Phase b) Load percentage c) DC Voltage d) Battery percentage e) Output Frequency
BATTERY
Nominal Voltage	384V DC.
Type	Sealed maintenance free/tubular lead Acid Battery.
Standby Period (Full Load at 0.8 PF)	30 Minutes (can be increased upto 2hrs and extended further on request).
GENERAL
Operating Temperature	0 to 45ºC.
Storage	-20ºC to +65ºC.
Finish	Cool Grey Shade No.5-C & 1-C/DA Grey IS632.
Relative Humidity Non Condensing	0 to 95%.
Enclosure Protection	IP20.
Dimensions HEIGHT WIDTH DEPTH	1800 mm 1000 mm 800 mm	1900 mm 1000 mm 800 mm	2000 mm 1100 mm 800 mm	2200 mm 1200 mm 900 mm
Weight	830 Kgs.	1000 Kgs.	1100 Kgs.	1300 Kgs.
OPTIONAL STATIC SWITCH
Transfer Time	a) Less than 5 milli-seconds from inverter to mains. b) Less than 5 milli-seconds from mains to inverter.
Indications	a) Aux. Supply On b) Load on Inverter c) Load on Aux. Supply d) Manual Bypass On