19" Rack Mount GPIB Programmable SMPS
GPIB Programmable Linear Power Supplies & Electronic Loads
Variable Output Linear Power Supplies - "LAB Series"
Tough Series Power Supply
High Voltage Variable Linear DC "LAB Series" Power Supplies
Switch Mode DC/DC Converters
AC-DC Switch Mode Power Supplies & Battery Chargers
Fixed Output Linear Power Supplies
DC-AC Sinewave Linear Inverters
Switch Mode Inverters /
AC Power Sources
Stabilizers / Line Conditioners & Isolation Transformers



Tel. : 91-022-25821861
Fax : 91-022-25823137
Email : response@aplab.com
 
 
SWITCH MODE SINEWAVE DC-AC INVERTER - 100W TO 500W

Features
Converts DC from Batteries into AC Line Power
Uses 20KHz PWM Technique
Built-in Low Battery Protection
Low Audible Noise
High Conversion Efficiency 75%
Sinusoidal Output Distortion <5%
Frequency of Output 50Hz / 60Hz Switch Selectable
Compact Light Weight
115V or 230V AC Output Switch Selectable
Panel Settable Output 210V - 250V / 105V - 125V
Efficiency Maintained even for Poorer Power Factor Loads
Switch Mode Sinewave DC-AC Inverter - 100W to 500W
 
TECHNICAL HIGHLIGHTS
8300 Series Static Low Power Inverters employ 20KHz reversible PWM technology to produce a low distortion sinewave AC output from DC input supply. The switching operation is ideal for driving low power factor loads like synchros without causing excessive dissipation in the unit.
 
VARIABLE FREQUENCY OPTION
8300 Series inverters have variable frequency options. The frequencies range from 45Hz to 55Hz, 54Hz to 66Hz and 360Hz to 440Hz.
 
Technical Specifications
Output Voltage Regulation ±2.0% of nominal voltage over permitted range of input voltage and load variation from no load to full load.
Low Power Factor 0.7 lag to 0.9 lead without any derating.
Output Frequency 50Hz/60Hz internally selectable ±1%.
Frequency Stability Standard Units : ±1% of selected frequency.
Optional : ±0.005% of selected frequency with crystal control.
Frequency Synchronisation External sync signal of 2V (rms) within ±3% of nominal frequency.
Reverse Polarity Fuse Protected.
Overload Capacity 130% of continuous rating for 10 secs.
Operating Temp. Range -20ºC to +50ºC.
Input Voltage Range -10% to +20%.
No Load Current <10% of full load.
Dimensions (mm) 220 (W) x 215 (D) x 88 (H) for Models 8311, 8322 and 8343,
300 (W) x 215 (D) x 132 (H) for Model 8344.
 
Selection Guide
Input Voltage
(Nominal)
Output Power VA
Continuous
Efficiency
Distortion
Weight
Kg / lbs
Model
12V
100VA
70%
<5%
3.8 / 8.4
8311
24V
200VA
75%
<3%
3.8 / 8.4
8322
48V
300VA
75%
<3%
4.0 / 8.8
8343
48V
500VA
78%
<3%
7.0 / 15.4
8344
 
Copyright © 2007-2008 Aplab Limited