Static Linear Inverters Sinewave Fixed or Variable Frequency Power Inverters

ABOUT US


	19" Rack Mount GPIB Programmable SMPS

	GPIB Programmable Linear Power Supplies & Electronic Loads

	Variable Output Linear Power Supplies - "LAB Series"

	Tough Series Power Supply

	High Voltage Variable Linear DC "LAB Series" Power Supplies

	Switch Mode DC/DC Converters

	AC-DC Switch Mode Power Supplies & Battery Chargers

	Fixed Output Linear Power Supplies

	DC-AC Sinewave Linear Inverters

	Switch Mode Inverters / AC Power Sources

	Stabilizers / Line Conditioners & Isolation Transformers

Tel. : 91-022-25821861
Fax : 91-022-25823137
Email : response@aplab.com

STATIC LINEAR INVERTERS SINEWAVE FIXED OR VARIABLE FREQUENCY
POWER INVERTERS - 100VA TO 500VA
(Minimum Order Qty. 10 Nos. in each type)

Features
	Converts DC Power from Battery into AC Line Power
	Distortion Free Stable Sinewave Stable Output of 115V, 220V or 240V rms
	Switch Settable Frequency of 50Hz / 60Hz
	Models with Variable Frequency on Request

Frequency of output is settable at 50 or 60Hz with a slide switch. Any other freq. upto 500Hz is available on request. Output voltage tap can be selected at 115V/220V or 240V. The inverters are compact, rugged and come in state-of-the-art packaging.

The 8200 series static inverters provide a regulated, low distortion sine-wave AC output from a DC input supply. Non-switching linear operation prevents RF1 noise injection into incoming DC line as well as output line. The no-load drain on DC source is very low.

Technical Specifications
Output Voltage Regulation	±3.0% of nominal voltage over permitted range of input voltage and load variation from no load to full load.
Low Power Factor	0.8 lag to unity P.F. capacity (VA) to be derated to 75% at 0.8PF lagging load.
No Load Input Current	<5% of F.L.
Overload Capacity	150% of continuous rating for 10 seconds.
Frequency Synchronisation	Provision of accept external sync-signal.
Frequency Stability	Standard Units : ±1% of selected frequency. Optional : ±0.005% of selected frequency with crystal control.
Overload & Short Circuit Protection	Electronic current limit for short term overloads. Short circuit protection with fuses.
Reverse Polarity Protection	Provided.
Operating Temp. Range	-20ºC to +50ºC.
Input Voltage Range	-10% to +20%.
Output Voltage	115V, 220V or 240V AC selected with internal taps.
Output Frequency	50/60Hz ±1% internal switch selectable.

Selection Guide
Input Voltage	Output Voltage VAC	Output Power VA Max. Continuous	Max. Waveform Distortion	Dimensions (mm) W x D x H	Weight Kg./lbs	Model
12V DC	115V, 220V or 240V selected with internal taps	100	<5%	210 x 221 x 132	8.5 / 19	8242
12V DC		200	<5%	210 x 357 x 132	12.5 / 27.5	8248
24V DC		100	<3%	210 x 221 x 132	8.5 / 19	8252
		250		210 x 357 x 132	12.5 / 27.5	8254
		500		416 x 445 x 130	24 / 53	8255
48V DC		200	<3%	210 x 357 x 132	12.5 / 27.5	8264
48V DC		500	<3%	416 x 445 x 130	24 / 53	8265