| Technical Specifications |
| Type |
Redundant SMPS modules (2 units) in a single rack. |
| Model No. |
CBSMPS. |
| Input Voltage |
230V AC ±10% 50Hz ± 3%. |
| Output Voltage |
Adjustable voltage : From 24V DC to 27V DC.
Continuous output at full load. |
| Current |
20 Amps 480 Watts max. |
| Output Ripple |
Less than 250mV r.m.s. |
| Line Regulation |
Better than 1V for complete input voltage range. |
| Load Regulation |
Better than 1V for load variation from 10-100%. |
| Output Voltage Drift |
Less than 0.2% of set voltage after warm-up. |
| Display |
Single 3 digit digital meter for output voltage and current with a switch for selection. |
| Protection Circuits |
Input over current protection thru’ MCB.
Overload/ short circuit protection.
Output over voltage.
SMPS over temperature protection. |
| LED Indications |
AC Input Power on.
Output present.
Output over voltage.
Output overload/ short circuit. |
| Termination |
All termination on front panel. |
| Dimensions |
3U size (module) size.
Less than 400 mm. |
| Mounting |
Two nos. plug in type modules in one 19” rack.
19” (W) x 400 mm (D) x 177 mm (H). |
| Cooling |
Forced air cooling with one fan for each SMPS. |
| Output Voltage Adjustment |
Thru’front panel with adjustability range from 24V to 27V DC. |
| Failure Contact |
1 N/O contact with 30V DC, 3A rating for each SMPS. |
| Input Isolation |
Thru’ MCB for each SMPS. |
