19" Rack Mount GPIB Programmable SMPS
GPIB Programmable Linear Power Supplies & Electronic Loads
Variable Output Linear Power Supplies - "LAB Series"
Tough Series Power Supply
High Voltage Variable Linear DC "LAB Series" Power Supplies
Switch Mode DC/DC Converters
AC-DC Switch Mode Power Supplies & Battery Chargers
Fixed Output Linear Power Supplies
DC-AC Sinewave Linear Inverters
Switch Mode Inverters /
AC Power Sources
Stabilizers / Line Conditioners & Isolation Transformers



Tel. : 91-022-25821861
Fax : 91-022-25823137
Email : response@aplab.com
 
 
PROGRAMMABLE PFC HIGH POWER DC SUPPLIES 600W - 2400W - VSP Series

Features
600W to 2400W Models High Overall Efficiency : +80%
19” Rack Slim Construction Very Low Output Ripple and Noise
Widely Programmable D.C. Output Input EMI Filtering – EN55022 CLASS A
Analog Voltage, Current and Resistance Programming 20 Millisecond Hold-up Time
Optional opto-isolated Analog Programming Two Front Panel D.P.M.s for V/O V and I
Digital Programming Options - RS232,
RS485 & GPIB
10 Turn Potentiometers for Voltage and Current setting
Field Upgradable G.P.I.B. IEEE 488.2 Programming for Digital Programming Mode Auxiliary Front Panel Output Terminals for Monitoring
Power Factor Corrected Input Sleek, 19” Rack Construction upto 1.2KW - 1U, 2.4KW - 2U
Remote Sensing Facility Internal Forced Aircooling
Automatic Current Sharing during Ext.
Parallel Operation
Stackable for Higher Power
 
Output Characteristic
Regulation : 0.1%.
Output Voltage Stability : 0.05%.
Transient Response : 100µs for 60% to 90% load change.
Operating Temperature : 0-50ºC.
Programmable PFC High Power DC Supplies 600W - 2400W
Protective Features
Overvoltage
Over Temperature
Over Current
 
Technical Specifications
Mains Input Range 190V to 264V.
Input Frequency 47 to 63 Hz.
Input Power Factor 0.99 On Full Load.
Inrush Current Limited by NTC.
Isolated Output 2.5KV to Input.
Efficiency 80% minimum.
Line Regulation 0.1%.
Load Regulation 0.1%.
Ripple & Noise See the Table.
EMI Filtering EN55022 CLASS A.
Safety Class EN60950.
Hold-up Time 20 Milliseconds.
Dimensions 19 Inch (W), 450 mm (D).
Ambient Temperature 0 - 50ºC.
Derating Above 50ºC derate the capacity at 4% per ºC.
 
Selection Guide
Model
Power
Output
Ripple & Noise
max. rms
Case Height
Voltage
Current
VSP2030
600W
0-20V
0-30A
15mV
1U
VSP4015
600W
0-40V
0-15A
10mV
1U
VSP6010
600W
0-60V
0-10A
10mV
1U
VSP2050
1KW
0-20V
0-50A
15mV
1U
VSP4030
1.2KW
0-40V
0-30A
10mV
1U
VSP6020
1.2KW
0-60V
0-20A
10mV
1U
VSP2090
1.8KW
0-20V
0-90A
15mV
2U
VSP4050
2.0KW
0-40V
0-50A
20mV
2U
VSP6040
2.4KW
0-60V
0-40A
20mV
2U
VSP8025
2KW
0-80V
0-25A
20mV
2U
VSP12020
2.4KW
0-120V
0-20A
20mV
2U
 
OPTION SUFFIX - Ordering Information
While ordering add suffix to have the desired programming options.
Suffix
  Option
   No Suffix   Remote Voltage, Current or Resistance Programming.
   OA   Opto-isolated Voltage, Current & Resistance Programming.
   OD I   Opto-isolated RS232 - ASCII Protocol.
   OD II   GPIB-IEEE488.2 - SCPI Compatible Protocol (includes OA & OD I).
   OD III   RS485 - SCPI Compatible Protocol (includes OA & OD I).
 
Rear Panel Details of Programmable PFC High Power D.C. Supplies VSP6020
 
 
Copyright © 2007-2008 Aplab Limited